PORSCHE 924S TURBO BOOST
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
With the insane results of our aluminum y-pipe kit for the Porsche panamera turbo, we wanted to step up the luxury look of the engine bay with a full carbon fiber version. this carbon fiber y-pipe is a full replacement and includes everything you need to install in place of the original.
Looking at the stock y design in front of the throttle body, we new there was improvements to be made. This throttle body is the same size as the Cayenne tt throttle body we use on our 996tt and 997tt upgrade kits. The stock y-pipe is a 2 piece plastic y design that is smooth on the inside with a "deflector" internally to channel air. The bad part about the stock one is it goes from a 78mm id at the throttle body down to...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$1,849.95
Make a selection
One of the most important upgrades for the Porsche 996, Cayenne turbo or panamera turbo is to replace the factory Bosch diverter valves. The factory valves are prone to leaking pressure under increased boost when the car has an upgraded ecu flash. As well, the factory Bosch valves will taper boost off with the diaphragm design even at stock boost levels. To help keep the boost pressure constant all the way to redline, upgrading the stock diverter valves to the agency power racing diverter valve kit will improve your cars overall performance.
These valves are cnc machined 6061 aluminum which have been precision engineered to fit with the stock or aftermarket f-hose and intake return hoses. The internal const...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 CAYENNE 2007-10 CAYENNE 2003-06
As you step up the power level on your 997 turbo, having proper cooling efficiency is mandatory to maximize your turbo performance. Street and track cars will heavily benefit from the use of our upgraded intercoolers. The factory Porsche intercooler core is great, but their end tanks are what is lacking. Agency power has developed these complete intercooler replacements for your Porsche 997 turbo. Some modifications are required to the intercooler frame and vehicle for fitment.
The bar and plate intercooler core is designed to provide maximum cooling efficiency for turbo cars producing up to 950 horsepower. The cast end tanks are aluminum and then precision welded to the thick racing upgraded cores. The ends...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$1,749.95
Make a selection
Brombacher 997.2 tt "cat-back" (sound version) muffler for OEM cats
Facts:
- up to 25 crank hp & + 25 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 5 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:t...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
Product details:
High-quality performance headers provide better boost response and power throughout the rpm range.
Features:
-fits all 993 turbo / turbo s vehicles (1995-1998)
-increases horsepower by 15 whp and improves throttle response
-saves 9 lbs from the rear of the vehicle
-available with or with out heat exchange
-features high velocity 3-into-1 pyramidal inverted cast merge collectors for improved exhaust scavenging.
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-all fabspeed performance products are backed by the fabspeed lifetime ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,895.00
Make a selection
Product details:
Allows unobstructed airflow to the twin turbo engine for maximum power, includes bmc air filter.
Features:
-fits all Porsche 996 GT2 vehicles (2001-2005)
-increases horsepower and torque by 20 whp and 21 ft-lbs
-3/4 lb. Extra boost with no other changes required
-simple bolt-on installation; no cutting or welding required
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 TURBO/GT2 2001-05
More air = more power! Ipd plenum's patented, cast aluminum "y" style plenum increases horsepower and torque by optimizing airflow into the intake manifold. For even greater gains we have packaged the ipd plenum with larger throttle bodies. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles). Combining the ipd plenum (74 m...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
From $1,230.90
Make a selection
We offer offers 3 stages of turbocharger upgrades. All upgrades come with upgraded compressor housings and custom machined seal plates. These upgrades are bolt up and come with a 1 year warranty. Rebuildable turbocharger core required.
The bnr stage 3 consists of an upgraded chra (center housing rotating assembly). This chra has the capabilities of over 400 rwhp in a properly modified car. The turbine and compressor wheels are upgraded and the center housing can come either water cooled or non water cooled. This unit will need minor fabrication for fitment on car. The thrust bearing is upgraded to 360 degrees. This is a great turbocharger for high boost applications. The rotating assembly is balanced/ bluep...(choose a part on the right to read more)
General Fitment 944 1985-88 944 1989-91
$1,270.50
Make a selection
This new borg warner / kkk - k27 7200 provides increased performance in the mid-range and top end. Maximum boost is achieved 300-500 rpms earlier than the factory turbo, due to the quicker spooling. Features: increased throttle response quicker spooling manufactured in Germany more performance direct replacement turbocharger hose 93011036801eq and clamps included. Genuine turbocharger k-27-7200 series sourced in Germany to ensure quality, reliability and precise fitment. This part number equates to the genuine original part # 930 123 003 02, for the m30.69 (3.3 l) and m64.50 (3.6 l) turbo engines. Sold individually. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks t...(choose a part on the right to read more)
General Fitment 911 1970-73
From $4,055.70
Make a selection
FVD Brombacher957 Cayenne turbo tt ihi ?16/24? ?700 series? Upgraded turbos.
Specifications:
- new, lightened and larger billet compressor wheel with state of the art ?extended tip?. ( 46.5 mm inducer).
- these turbos are the ihi size equivalent to the kkk 16/24 ? As a reference.
- cnc re-profiled compressor housing and backplate.
- optimized clearances.
- re-uses factory vacuum unit (wastegates).**
- up to 50% more power compared to the factory turbo?s!
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- remanufactured by ihi certif...(choose a part on the right to read more)
General Fitment CAYENNE 2011-14 CAYENNE 2007-10
$2,432.70
Make a selection
Replacement wastegate spring allows turbo to generate higher boost pressure- up to 1 bar.
We recommend utalizing replacement boost pressure switch
(part # 930 606 101 00)
With our replacement boost spring.
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), turbo 3.3 (78-89), turbo 3.0 (75-77)
General Fitment 911 1989-94 911 1970-73
Replacement reinforced boost hose kit. Eliminate a common problem on the 993 turbo. On most all modified 993 turbos the OEM boost hoses will leak and blow out with higher boost pressure under acceleration. These hoses will also begin to deteriorate and leak as they age. Replace your OEM hoses with this reinforced boost hose kit. All of these hose kits are pressure tested and will not burst even under the most extreme operating and environmental conditions. This reinforced boost hose kit comes as a complete bolt on kit.
From turbo to intercooler
43 / 57 mm x 410 mm
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock...(choose a part on the right to read more)
General Fitment 911 1994-98
Silicone boost hose
Replacement boost hose eliminates common boost hose "blow outs" on modified turbo's.
Facts:
tested to withstand over 75 psi (5 bar) boost pressure.
fuel and oil resistant
temperature range between - 50 to + 180 degrees
bolt on kit
Over time the OEM hose tend to expand and contract under higher load, which leads to leaks, or "blow outs".
The hose is a bolt on.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 TURBO/GT2 2001-05
+ 20 crank hp + 28 crank tq gain while offering ultra-smooth drivability and reliability that you expect from your Porsche®.
Genuine:
Engine - 6 cylinder boxer turbo
Capacity – 3.3 l (201 ci)
Max. Power – 300hp (300 ps)
Max. Torque – 304 lb ft (412 nm)
Includes:
Bmc sport-air filter insert – 47043708
FVD 1.0 bar boost spring – FVD123110
Boost pressure switch – 93060610100
General Fitment 911 1978-83 911 1984-86 911 1987-89
Software control module - 958 Cayenne turbo 2011+
+ 50 crank hp & + 80 crank torque gain! - sports plus*
- external unit that integrates seamlessly with the factory ecu.
- software is completely reversible and undetectable for dealer service / diagnostics / warranty.
- dyno proven and comprehensively tested on the autobahn and under daily driving conditions.
- all of the OEM engine software safety features are fully intact and not disabled.
- customizable for your needs (larger turbo chargers, exhausts, intercoolers, etc.).
FVD vs. The competition
- our module samples far more information than our competitor's products for safe, reliable power!
We sample the intake manifold pressure sensor, boo...(choose a part on the right to read more)
General Fitment CAYENNE 2011-14
$1,094.50
Make a selection
Kit includes:
Power-flow kit, sport camshafts, boost spring, support ignition, turbocharger k29
General Fitment 911 1989-94
$8,750.38
Make a selection
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler, k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (415hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 423kw (575hp) @ 6500rpm
Max. Torque - 780nm @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horse...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$21,571.48
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler with 100cell sport catalytic, k24-race turbocharger l/r
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (415hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 397kw (540hp) @ 7000rpm
Max. Torque - 760nm (561lbf ft) @ 4500rpm
Max. Speed - 331km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$14,998.41
Make a selection
Kit includes:
Dme upgrade ( fast load), sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 12,0:1
Max. Power - 305kw (415hp) @ 7600rpm
Max. Torque - 405nm (299lbf ft) @ 5500rpm
Max. Speed - 310km/h
Max. Rpm - 8400rpm
Acceleration 0-100km/h - 4.3s
Tuning:
Max. Power - 314kw (427hp) @ 7500rpm
Max. Torque - 420nm (310lbf ft) @ 5500rpm
Max. Speed - 315km/h
Max. Rpm - 8700rpm
Acceleration 0-100km/h - 4.1s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability and most importantly reliabi...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$1,921.54
Make a selection
Kit includes:
Software fast load, power-flow kit, header system, sport catalytic kit, sport camshafts
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 235kw (320hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 257kw (350hp) @ 7000rpm
Max. Torque - 410nm (302lbf ft) @ 4500rpm
Max. Speed - 298km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.5s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining t...(choose a part on the right to read more)
General Fitment 911 1998-05
$11,048.98
Make a selection
Kit includes:
Software fast load, power-flow kit, header system, TUV "oe look" sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 235kw (320hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 250kw (340hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 295km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the driv...(choose a part on the right to read more)
General Fitment 911 1998-05
$7,961.80
Make a selection
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
For 1996 model year Porsches please see our part number FVD 993 618 71. You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us. The reason is 1996 model year ecu eprom's could only be flash loaded with software one time. To program these units requires the use of a coding socket. A late model ecu (1...(choose a part on the right to read more)
General Fitment 911 1994-98
$1,094.50
Make a selection
From the factory, Porsches turbo models come with a bulky, restrictive cast intake air distributor plenum and inadequate diameter piping to the intake side of the turbochargers. This piping also causes a difference in boost pressure of up to .3 bar between the left and right side turbos and is not suited for higher horsepower applications.
In order to obtain tuning gains over 530 hp for turbocharged vehicles it is necessary to install our FVD intake plenum kit. The lightweight aluminum FVD intake plenum kit balances the boost pressure between the turbochargers and significantly increases the volume of the intake air to the turbos.
FVD intake plenum kit increased power in the midrange up to 25hp in combinati...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 BOXSTER 2005-08
$1,094.50
Make a selection
Kit includes:
Software dme (fast load), FVD TUV muffler (200 cell catalytics), bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 408kw (555hp) @ 6000rpm
Max. Torque - 745nm (550lbf ft) @ 4000-4500rpm
Max. Speed - 325km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche en...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,818.90
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|